Caracteristici
Etos-300 is max six specimens molding machine at the same time for tiny and unwieldy specimens to make a fixed size for easy handling. Etos-300 can be mold various material such metal, plastic, ceramic, etc. Etos-300 consists of a hydraulic device, 10” touch screen, and soft touch button for easy command input mode and progress checking. And also, this has all-in-one device (heaters and cylinders) for efficiency.
Aplicații
Industry & Manufacturing
Specificații
Specification
| Size | 1,410mmW X 800Dmm X 1,550mmH |
| Electric | 220V, 60Hz, 3 phases, 60A |
| Pressure method | Automatic hydraulic method |
| Mold type | Cylindrical type - 6 hole/set |
| Air cooling system to prevent internal temperature rise | |
| Mold size | 25mm ~ 38mm diameter selection (Option 40mm, 50mm) |
| Thermocouple | K type |
| Mold heater | 1.6kw , 220 V |
| Automatic cooling after occurrence of malfunction | |
| Upper cap material | Bakelite, Mold number intaglio seal |
| Molded specimen storage | |
| Automatic pressure removal after molding completion | |
| Push buttons | START, STOP, RAM UP/DOWN |
| Maximum heating temperature | Maximum 250 C |
| Maximum temperature/pressure limit alarm/cancel release | |
| All-in-one heater for heating and cooling to detect temperature | |
| Cooling method | Water cooling by solenoid valve |
| Control panel | 10” Touch screen type |
| Molding condition set-up and checking (Cooling, Pre-heating, Load, Maintenance) | |
| Molding progress status | |
| Cylinder manual Up/Down | |
| Manual coolant and cooling fan On/Off | |
| Pressure and temperature limit | |
| Saving memory | 30 channels |
| Emergency stop | All stop initialization |
| Transparent tempered window, wheels for movement, and Maintenance door | |
| LED installation for internal observation and maintenance | |
| Mold pre-heating after molding completion |