• 12 months warranty


The CUTLAM®3.1 offers an unprecedented cutting capacity, the machine table can move forward and backward automatically over a distance of 300 mm. The cut-off wheel has an automatic and linear top-to-bottom movement. Thanks to this linear movement, 140 mm space is offered under the cutting wheel. It has a cover which includes opening side to cut bars.

The CUTLAM®3.1 has a large touch screen of 5.7 inches and an intuitive interface which makes it extremely easy to use. With the help of two joysticks located near the control screen, the 2 motorised axes of CUTLAM®3.1 can be contolled manually. The internal memory allows to save over 300 cutting programs, which can be imported or exported via USB port.

To prevent any deterioration or deformation of the samples, the rotation speed of the cutting wheel and the feed speed of the axes can be programmed. There are possible 3 cutting modes: manual, semi-automatic, and automatic and the axes movements can be continuous or sequenced.



Many cutting possibilities are offered: it is possible to cut vertically (along Z axis), over a maximum stroke of 200 mm or to cut horizontally (along Y axis), over a maximum stroke of 300 mm. It is possible also to combine the two Z and Y movements. This machine can optionally be equipped with a manual or automatic X axis for cutting parallel sections.





Quick positioning with joysticks and touch screen with graphical interface



Support cabinet with integrated cooling system (60 liters)




       Positioning laser



An interlocking device maintains the cover in its closed position when the cutting wheel is rotating. 

The cutting capacity of CUTLAM®3.1:





Technical Data

Wheel Ø 250 to 305 mm
Shaft Ø 25.4 mm
Protection Cover secured by interlocking. Man presents button for operating the axes when the cover is open.
Voltage 400 Volts - 50 Hz (three-phase + ground)
Dimensions (W x H x D) 900 x 700 x 1000 (H. cover open 1100 mm)
Weight 210 kg
Reference 60CT30100
Max cutting capacity Ø 110 mm
Table Stainless steel 574 x 298 mm
Space between the cutting wheel and the table (with wheel Ø 300 mm) 140 mm
Longitudinal movement - table 300 mm
Vertical movement - wheel 200 mm
Transversal movement 150 mm (optional)
Cooling/Lubrification Recirculation system, 60 liters decantation tank, 2 chambers. Input 100 µm filter. 800 L/hour pump driven by the machine.
Wheel rotation speed From 1000 to 4000 rpm
Cutting mode Manual, semi automatic, automatic.
Feed speed control From 0.1 to 20 mm/s, continuous or sequenced. Intelligent motion: automatic check of the feed motion according to the resulting torque on the cutting wheel motor.
Lighting LED strip
Motor power wheel 3.8 kW